In Your Cart
1 item(s) totalling $43.20 Checkout
DECODER ACCESSORIES- ALL
-
8 PIN NMRA PLUG 1254
This is an 8 pin NMRA standard plug. TCS Type#1254…$4.95 -
DCCIAS Dummy Plug Single
DIGITRAX type DC dummy plug. Sold individually. As always call to see if you qualify for any additional discounts,…$3.20 -
DCCIAS Connector Pins 30 pin SIP
These are 30 Pin SIP Sockets of the "snappable" type. $1.75 each. You can easily cut them to any length…$1.75 -
DCCIAS Connector Pins 40 pin SIP
These are 40 Pin SIP Sockets of the "snappable" type. $2.34 each. You can easily cut them to any length…$2.34 -
DCCIAS DCC to DC Voltage Converter
Simply a full wave bridge and capacitor circuit for use on "in car lighting" circuits etc. Any place you…$9.00 -
DCCIAS How To Use The Pins For Connectors
Individual pins can be cut out of the plastic mounts to use as individual pins or plugs. Look at the…$0.00 -
DIGITRAX Decoder / Signalling Installation Wire 30 AWG 10 Ft.
Decoder Wire for decoder, lighting & signal installation 90ft 30AWG stranded wire-10 ft lengths in 9 colors. For specs…$12.00 -
DIGITRAX DHWH Wire Harness 5 Pack
DIGITRAX DHWH Wire Harness 5 pack, without 8 pin NMRA plug. As always call to see if you qualify…$12.00 -
DIGITRAX DHWHP DCC Medium Wire Harness 3.25 inch
DIGITRAX DHWHP Medium Wire Harness 3.25 inches long. As always call to see if you qualify for any additional…$6.00 -
DIGITRAX DHWHPS DCC Short Wire Harness 1 inch
DIGITRAX DHWHPS Short Wire Harness 1 inche long. As always call to see if you qualify for any additional…$6.00 -
DIGITRAX DNDP DUMMY PLUG 5 PACK
DIGITRAX DC dummy plug 5 pack. DNDP 5-Pack Dummy plug for Digitrax N scale Harness system…$16.00 -
GME CAM 1/8th INCH AXLE
This is a 4 point axle cam made for 1/8th inch axles. It is manufactured by Grizzly Mountian Engineering.…$19.95 -
GME CAM 2.0 MM AXLE
This is a 4 point axle cam made for 2.0 mm axles. It is manufactured by Grizzly Mountian Engineering.…$19.95 -
GME CAM 2.5MM AXLE
This is a 4 point axle cam made for 2.5 mm axles. It is manufactured by Grizzly Mountian Engineering.…$19.95 -
GME CAM 3 MM AXLE
This is a 4 point axle cam made for 3 mm axles. It is manufactured by Grizzly Mountian Engineering.…$24.95 -
GME CAM 4 MM AXLE
This is a 4 point axle cam made for 4 mm axles. It is manufactured by Grizzly Mountian Engineering.…$19.95 -
LOKSOUND 50707 Current Collector (WHEEL POWER PICKUPS)
ESU calls them current collectors, but they are wheel power pickups. Pick up power from your HO or N…$11.99 -
LOKSOUND 51950 8 PIN SOCKET WITH WIRES
51950 cable harness with 8-pin plug according to NEM 652, DCC colour, length 300mm If the loco in question…$4.29 -
LokSound 51955 ADAPTER BOARD DIRECT TYPE
This is just the adapter board (no decoder attached) that a NEXT18 MICRO decoder can be attached, sound or nonsound…$10.39 -
LOKSOUND 51968 21 MTC ADAPTER BOARD #2
The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if…$13.99
Result Pages:
Bestsellers
- DCCIAS Connector Pins 30 pin SIP
- TCS 21 PIN MALE ADAPTER 21-HW-SINGLE PACK #1653-1
- 8 PIN NMRA PLUG 1254
- TCS 9 PIN JST WIRED HARNESS like 1345
- LOKSOUND 50707 Current Collector (WHEEL POWER PICKUPS)
- DIGITRAX Decoder / Signalling Installation Wire 30 AWG 10 Ft.
- LOKSOUND 51950 8 PIN SOCKET WITH WIRES
- SOUNDTRAXX 810038 STEAM EXHAUST CAM KIT
- DIGITRAX DHWH Wire Harness 5 Pack
- SOUNDTRAXX 810123 NMRA 8 Pin Socket / Plugs