In Your Cart
0 item(s) totalling $0.00
New Products
-
LokSound 51969 8 Pin (Female) Adapter board for PluX 12, 16, 22
51969 8 Pin (Female) Adapter board for PluX 12, 16, 22 DISCONTINUED WHEN SOLD OUT…$11.83 -
LokSound 50706 INTERIOR LIGHTING POWER PACK
TWO small interior lighting power packs (keep olives) DISCONTINUED WHEN SOLD OUT…$9.99 -
LokSound 51951 cable harness with 6-pin plug according to NEM 6
51951 cable harness with 6-pin plug according to NEM 651, DCC colour, length 300mm 51951: Solder in the harness and then plug…$4.39 -
LOKSOUND 51995 Adapter board, 18-pin Next-18 socket to NEM652 8-
51995 Adapter board, 18-pin Next-18 socket to NEM652 8-pin, Flex, 88mm, with heat shrink tube. Flex leads see photo Discontinued when…$6.79 -
LokSound 50710 LED lighting strip, PowerPack energy storage, 0,2
The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably…$8.45 -
LokSound 51970 I/O expansion board for LokSound, LokPilot 21MTC
DISCONTINUED WHEN SOLD OUT. With this expansion board you can easily expand your LokPilot or LokSound decoder (with 21MTC interface!):…$43.12 -
LokSound 51968 Adapter board 21MTC
DISCONTINUED WHEN SOLD OUT. Adapter board 21MTC interface…$13.59 -
LokSound 51957 Adapter board 21MTC for 8 amplified outputs, with
DISCONTINUED WHEN SOLD OUT. SPECIAL ORDER AFTER THAT Our new adapter board 3 for decoders with 21MTC interface is best…$12.39 -
LokSound 50704 LED lighting strip, cabin, 1 LED, „warm-white“, 1
Small modules that can easily be installed either in cabs or as end-of-train lights make fitting protypical lighting of your…$7.92 -
59828 LokPilot 5 micro DCC, Next18, gauge N, TT
The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a…$30.32 -
59629 LokPilot 5 DCC, 21MTC NEM660, gauge H0 ,0
The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the…$29.52 -
59620 LokPilot 5 DCC, 8-pin NEM652, gauge H0 ,0
The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the…$29.52 -
59220 LokPilot 5 Fx DCC, 8-pin NEM652, gauge H0, 0
The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control…$22.32 -
58751 LokSound 5 micro DCC Direct Atlas Legacy "blank decoder",
The LokSound 5 micro DCC Direct has been specially developed for installation in N gauge locomotives of the Atlas and…$99.99 -
58923 LokSound 5 Nano DCC »Blank decoder«, single wires, gauge:
58923 LokSound 5 Nano DCC »Blank decoder«, single wires, gauge: N, TT With the LokSound 5 Nano DCC, ESU has succeeded in…$99.99 -
NCE SNUBBER
Use with any DCC system to prevent large voltage spikes. Reduces or eliminates voltage spikes on long runs of DCC bus…$13.55 -
DIGITRAX SDXH167D Premium 1 Amp Sound Decoder HO Scale
SDXH167D Sound Decoder 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0…$59.00 -
TCS 1673 K7D4
The K7D4 is a 4-function N-scale drop-in decoder designed to fit Kato locomotives. Examples include the following: Kato: ACS-64 EMD SPD40F Ge 4/4…$47.16 -
T2 Tsunami 2 TSU-1100 BIG STEAM 884011
The TSU-1100 is a micro 1-amp, universal-style digital sound decoder. It is ideal for small models with minimal space. It…$111.96 -
SOUNDTRAXX 810162 MiniCube3 Speaker and Baffle 8 Ohm
Dimensions: 12 x 5.5 x 3mm(D) Frequency Response: 800Hz - 20kHz Peak Power: 50mW Impedance: 32 Ohms…$15.96
Categories
Manufacturers
Bestsellers
- LED Surface Mount (SMD) 3528 Warm White With NO Wires
- LED Surface Mount (SMD 5050) Warm White With Wires
- LED Golden White 3mm
- Bass Reflex 52mm x 18mm
- LED Surface Mount (SMT) 603 Sunny White with 6 inch wires attach
- DCCIAS Connector Pins 30 pin SIP
- LED Surface Mount (SMD 5050) Warm White NO Wires
- LED Surface Mount (SMT) 603 Golden White with 6" wires attached
- LED Sunny White 3mm
- DIGITRAX DH165A0